Default Values - Nokia DNT2Mi sp/mp Operating Instructions Manual

6.9

Default values

44 (128)
Data Network Terminal Single-port and Multiport Operating Instructions
Table 3. Monitoring a line (Continued)
Line voltage: xx V
Signal quality
Last 15 min
Signal quality
Last 24 hours
Table 4. Explanation of noise margin
Noise margin
+15 dB
+1 dB
0 dB
The following default values can be recalled, for example from the Q1 menu path
6,6:
Table 5. Global parameters
Timing source
Front panel operation rights
Q1 address *)
Q1 management path
Control and test loop limit
Q1 password for settings
Equipment ID
Use of front panel
© Nokia Corporation
Nokia Proprietary and Confidential
Alternatives: 55 to 155 V + no remote power
Signal quality monitored during 1 period of 15 minutes to
max. 4 (with front panel menus) or 100 (with Q1 menus)
successive periods of 15 minutes.
Front panel menus give you absolute values and Q1
menus both absolute and relative values.
Signal quality monitored during 1 period of 24 hours to
max. 4 (with front panel menus) or 30 (with Q1 menus)
successive periods of 24 hours.
Front panel menus give you absolute values and Q1
menus both absolute and relative values.
Bit error ratio
-7
Expected BER < 10
-7
Expected BER 10
Line
Testing and configuration allowed
2
Q1 via line: on
LM interface: on
10 minutes
No protection, password: DNT2Mi
DNT2Mi
Full menu
DN01145897
Issue 2-0 en