Zennio Z41 Firmware Update
Via the usb / ethernet interfaces
Hide thumbs
Also See for Z41:
- User manual (87 pages) ,
- Technical documentation (2 pages) ,
- How to configure (15 pages)
Related Manuals for Zennio Z41
Summary of Contents for Zennio Z41
-
Page 1: Firmware Update
Z41 / Z41 Lite / Z41 Pro Firmware Update via the USB / Ethernet interfaces Document version: e www.zennio.com... -
Page 2: Document Updates
Firmware Update – Z41 DOCUMENT UPDATES Version Modifications Page(s) Inclusion of certain particularities specific for the new product Z41 Pro. Inclusion of certain particularities specific for the new product Z41 Lite. Important note about bus/power failures within the first two minutes after a firmware update. -
Page 3: Table Of Contents
Firmware Update – Z41 CONTENTS Document Updates ........................2 Contents ............................3 Introduction .......................... 4 Update via USB ........................5 Step-by-Step Process ..................... 5 Troubleshooting ......................7 Update via Ethernet ......................9 Step-by-Step Process ..................... 9 3.1.1 Additional Remarks ....................14 Troubleshooting ...................... -
Page 4: Introduction
USB adapter (ref. ZN1AC-UPUSB). Downloading the firmware to Z41 or Z41 Pro through the local network from a PC running the Windows operating system, by means of the Ethernet adapter (see the Z41 user manual) bundled with the original packaging of the device. -
Page 5: Update Via Usb
Updating the firmware via USB (universal serial bus) requires a male mini-USB to female USB adapter (reference ZN1AC-UPUSB; not bundled by default with Z41 / Z41 Pro / Z41 Lite – it is necessary to acquire it as a spare part) and a USB flash memory drive. - Page 6 Important: do not connect Z41 / Z41 Pro / Z41 Lite directly to the USB port of a PC, nor plug into Z41 / Z41 Pro / Z41 Lite a cable/adapter other than the male mini-USB to female USB adapter provided by Zennio, as the device may become damaged.
-
Page 7: Troubleshooting
Pro / Z41 Lite. The .pak file and the already Obtain a more recent / loaded firmware on Z41 / Z41 Pro different version of the .pak / Z41 Lite have the same version. file, if available. The firmware update feature... - Page 8 Firmware Update – Z41 The .pak file was damaged, or the Restart the process (by download to Z41 / Z41 Pro / Z41 disconnecting and then Lite failed. connecting back the USB drive) and/or obtain a fresh copy of the desired firmware.
-
Page 9: Update Via Ethernet
Ethernet cable connected to Z41 or Z41 Pro by means of the adapter supplied with the original packaging of the device. Note: this firmware updating method is only available for Z41 and Z41 Pro as Z41 Lite does not incorporate an Ethernet interface. - Page 10 *.ZIP file containing the firmware corresponding to the version of the application program to be used. Compressed inside this *.ZIP file is the update package for Z41 / Z41 Pro (under the name z41_update.pak for Z41 and z41_pro_update.pak for Z41 Pro).
- Page 11 Firmware Update – Z41 Figure 4 Main window in the Z41 Update tool This window lists all the Z41 and Z41 Pro devices detected in the network. Each of them shows its identifying name, if parameterized in ETS (see the Z41 or Z41 Pro user manuals), and the individual address it was assigned in the KNX topology.
- Page 12 ETS parameterisation of the application program currently installed on Z41 or Z41 Pro (see user manual), it will be necessary to type such password in the corresponding textbox. If no password was set, it can be left blank.
- Page 13 Note: prior to the update process, please ensure that the device is provided with external power and has IP connectivity. Please refer to the element diagram in the Z41 or Z41 Pro user manual to identify the device connections and the Ethernet adapter (bundled with the original packaging) required for firmware updates through the network.
-
Page 14: Additional Remarks
3.1.1 ADDITIONAL REMARKS Beginning with Z41 3.0, Z41 Lite 1.0 and Z41 Pro 1.1, the integrator is allowed to enable or disable (in ETS) the firmware updates via USB or Ethernet, and even to set a password that will be required for the second case. -
Page 15: Troubleshooting
Manager and enable or install installed on the PC. the network interface. Z41 or the PC are not connected Connect the PC and Z41 to to a wired Ethernet network. the wired Ethernet network. Z41 is not being powered. - Page 16 ETS. firmware that matches the current application program. Z41 / Z41 Pro does not An old version of Z41 Update is Download the latest version get properly updated or being used. available of Z41 Update, to...
- Page 17 Join and send us your inquiries about Zennio devices: http://support.zennio.com Zennio Avance y Tecnología S.L. C/ Río Jarama, 132. Nave P-8.11 45007 Toledo (Spain). Tel. +34 925 232 002. Fax. +34 925 337 310. www.zennio.com info@zennio.com...