Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Slide the power-adapter port into the slot on the computer base.
2 Align the screw holes on the power-adapter port bracket with the screw
holes on the power-adapter port.
3 Replace the screws that secure the power-adapter port bracket to the
computer base.
4 Route the power-adapter port cable through the routing guides on the
computer base.

Post-requisites

1 Follow the procedure from step 4 to step 11 in "Replacing the
board".
2 Replace the display
3
Replace the I/O
4 Replace the hinge
5
Follow the procedure from step 5 to step 11 in "Replacing the
6 Replace the wireless
7
Replace the solid-state
8 Replace the memory
9
Replace the base
128
Before working inside your
assembly.
board.
covers.
card.
drives.
modules.
panel.
computer. For more safety best
computer.
system
palm rest".