Replacing The Display; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the display back-
cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Place the display back-cover on a clean and flat surface.
2 Follow the procedure from step 1 to step 3 in "Replacing the
AlienHead LED
3 Follow the procedure from step 1 to step 3 in "Replacing the
AlienFX LEDs".
4 Adhere the display board and camera cable to the display back-cover.
5
Route the display-board cable through the routing guides on the display
back-cover.

Post-requisites

1
Replace the camera.
2 Replace the display
3
Replace the display
4 Follow the procedure from step 2 to step 5 in "Replacing the
5
Replace the display
6 Replace the hinge
7
Follow the procedure from step 5 to step 11 in "Replacing the
8 Replace the wireless
9
Replace the solid-state
10 Replace the memory
11
Replace the base
98
Before working inside your
board".
hinges.
panel.
assembly.
covers.
card.
drives.
modules.
panel.
computer. For more safety best
computer.
Alienware
display-panel
display bezel".
palm rest".