Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Alienware 15 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Align the screw holes on the power-button board with the screw holes on
the palm-rest assembly.
2
Replace the screws that secure the power-button board to the palm-rest
assembly.
3
Slide the touch-pad cable and status-light cable into the power-button
board and press down on the latches to secure the cables.
4
Connect the power-button board cable to the power-button board.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2
Replace the solid-state
3 Replace the memory
4
Replace the base
Before working inside your
drives.
modules.
panel.
computer. For more safety best
computer.
palm rest".
59