Replacing the wireless card
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in
After working inside your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damaging the wireless card, do not place
any cables under it.
1
Align the notches on the wireless card with the tabs on the wireless-card
slot.
2
Slide the wireless-card at an angle into the wireless-card slot.
3
Connect the antenna cables to the wireless card.
A label at the tip of the antenna cables indicates color scheme for the
wireless card supported by your computer.
Connectors on the wireless card
Auxiliary
Main
4
Press the other end of the wireless card down and align the screw hole on
the wireless-card bracket with the screw hole on the system board.
5
Replace the screw that secures the wireless-card bracket to the system
board.
Post-requisites
Replace the
base
Before working inside your
panel.
computer. For more safety best
Antenna-cable sticker
color
White
Black
computer.
35