Assembling Your Steam Mop - Shark S2901SL Owner's Manual

Assembling Your Steam Mop

IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head, change
or remove the cleaning pocket when the mop is
plugged into the wall. To prolong the life of your
Shark Multi-Function Steam Pocket
®
Lite we recommend using distilled water. Make
sure you only add water to the tank. Chemicals or
cleaning solution may damage the appliance and
could be unsafe for you and your family.
fig. 1
1
Mop
®
2
3
STEAM MOP ASSEMBLY
Insert the Mop Handle end with the "
the front of the unit into the handheld steamer.
Push the mop handle in until you hear it click into
place. (fig. 1)
Select the Rectangle or Triangle mop head and the
desired cleaning pocket. Fit one side of the pocket
onto the head first, then using the loop, pull the
pocket over the head. Attach the quick fasteners
on the top of the pocket to secure in place.
Snap the mop head into the mop body by lining
up the groove on the back of the mop body with
the groove on the back of the mop head. Push
until you hear it latch into place. Press the release
button to remove or change the mop head.
(fig. 2)
fig. 2
" facing
3