Shark S2901SL Owner's Manual page 13

USING THE WINDOW SQUEEGEE
Cleaning Tip: To use the window squeegee,
work with the vapor jet down using top
to bottom movements. To do this without
leaving streaks, use lateral movements from
the top to the bottom of the surface.
CAUTION: Always avoid any sudden changes
in temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into the
handle of the Accessory Hose until it clicks into
place. (fig. 15)
2 Press the power button to start steaming.
3 To remove the Window Squeegee, press and hold
down the Accessory release button. Then slide
out the Window Squeegee.
CAUTION: Turn the unit off before attaching or
removing the Window Squeegee.
fig. 15
USING THE FLAT SCRUBBER
Cleaning Tip: The Flat Scrubber is designed
for cleaning a variety of surfaces and is
exceptional on those that are large and flat
including counter tops, table tops, walls
mirrors, windows, stairs, shelves and other
similar surfaces. Super absorbent microfibre
bonnet loosens, lifts, and locks in dirt and
grime while sanitising at the same time.
1
2
3
4
To attach the All-Purpose Scrubber Bonnet, place
the bonnet exterior side down on a flat surface
(lavender tab indicates the bottom of the bonnet)
and insert the top of the Flat Scrubber Tool into
the top portion of the bonnet and then pull the
bonnet over each side of the back edge.
Attach the Flat Scrubber Tool by snapping into the
Accessory Hose until it clicks into place. (fig. 16)
Press the power button to start steaming.
To remove the Flat Scrubber Tool, press and hold
down the Accessory release button. Then slide
out the Flat Scrubber Tool.
CAUTION: Turn the unit off before attaching or
removing the Flat Scrubber Tool.
CAUTION: Do not use the Flat Scrubber
Tool without the All-Purpose Scrubber Bonnet
attached.
fig. 16
9