Oiling The Shaver Head; Disposal - Silvercrest SHBS 600 A1 Operation And Safety Notes

Note: The shaver head
any other liquids. Oil the shaver head

Oiling the shaver head

Q
j
O nly use acid-free oil, e.g. sewing machine oil.
j
R emove the comb attachment
without an attachment".
j
P ress the trimmer head
j
P ut one or two drops of oil between the blades and distribute the oil evenly.
j
R eplace the shaver head
j
W ipe off excess oil with a cloth.

Disposal

Q
Protect the environment!
This hair and beard clippers has two integrated NiMH rechargeable batteries
inside it.
Do not dispose of the batteries or the device with normal household refuse. Contact
your local council to find out about environmentally friendly and proper disposal of
the device (as electrical scrap). Observe the applicable local and national disposal
regulations with regard to separation of materials, waste collection and recycling
centres.
The packaging is wholly composed of environmentally friendly materials that can
be disposed of at a local recycling centre.
The following parts should be disposed of separately:
– Motor, metal parts, circuit board
– AC adaptor plug
– Plastic parts
– Rechargeable batteries
Take these parts for recycling.
may only be cleaned with medical alcohol. Do not use water or
2
as described in the following section.
2
2
from the appliance as described in the section "Cutting
1
downwards (see Figs. D) and remove it.
2
and the comb attachment
2
Cleaning and Care / Disposal
again (see Figs. E).
1
GB/MT 57