Cleaning and care / Disposal
Hold the hair and beard clippers with the front pointing upwards.
Use moderate force to press the cutting edges downwards
(see Figs. B+C).
Clean the hair and beard clippers with the cleaning brush.
Push the projection of the cutting attachment
the casing (see Fig. D).
Press the cutting edges of the cutting attachment
until you can hear it click into place.
Note: The trimmer head
alcohol. Do not use water or any other liquids.
Oiling the trimmer head
Only use acid-free oil, e.g. sewing machine oil.
Remove the comb attachment
the section called "Cutting without an attachment".
Press the trimmer head
Put one or two drops of oil between the blades and distribute the
Replace the shaver head
Wipe off excess oil with a cloth.
Protect the environment!
This hair and beard clippers has two integrated Ni-MH rechargeable
batteries inside it.
may only be cleaned with medical
from the device as described in
downwards (see Figs. B+C) and
and the comb attachment
under the edge of