Connect The Car Kit Manually; Connect The Car Kit Automatically; Disconnect The Car Kit; Connect The Car Kit To Two Devices - Nokia CK-200 User And Installation Manual

In some devices, you may need to make the connection separately
after pairing.
If pairing succeeds, the car kit is displayed in the list of currently paired
Bluetooth devices in your device, and the paired device is displayed in
the Connection manager menu of the car kit.
When the car kit is connected to your device and ready for use, the
Bluetooth name of the device is displayed.

Connect the car kit manually

When you switch on the car kit, it tries to connect to one or two last
connected devices, depending on the Multipoint connection setting.
To manually connect the car kit to a device (for example, after
connection loss), make sure the device is switched on, and, in standby
mode, select Menu
the device.

Connect the car kit automatically

You may be able to set your mobile device so that the car kit connects to
it automatically. To activate this feature, modify the paired device
settings in the Bluetooth menu of your device.

Disconnect the car kit

To disconnect the car kit from your mobile device, close the connection
in the Bluetooth menu of your device. Alternatively, in standby mode,
select Menu > Settings
device you want to disconnect.

■ Connect the car kit to two devices

You can connect the car kit simultaneously to two compatible Bluetooth
devices by default. To allow the car kit to connect to only one device at a
time, in standby mode, select
Multipoint connection
connected to two devices, and
> Settings > Connection
> Connection
Menu >
> off. If you select on, the car kit can be
is displayed.
> Connection manager
> Connection manager
Settings > Connection
G e t s t a r t e d
and
and the
>
17