Update The Software - Nokia CK-200 User And Installation Manual

• When installing the parts of the car kit, make sure none of them
interfere with or hinder the steering or braking systems or other
controls or systems used in the operation of the vehicle (for example,
airbags). Make sure the car kit and any of its components are not
installed where you might come in contact with it in the event of an
accident or collision.
If the display of a mobile device is to be used, make sure the device is
mounted in a holder and that the device display is clearly visible to
the user.
• Your service technician or dealer may be able to provide you with
information on alternatives for mounting the equipment suitably in
your vehicle without requiring bore holes.
• Do not smoke when working on the car. Make sure there is no source
of fire or flame nearby.
• Take care not to cause damage to electrical cables, fuel or brake
lines, or safety equipment during installation work.
• RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles such as electronic fuel injection
systems, electronic antiskid (antilock) braking systems, electronic
speed control systems, and airbag systems. If you notice a fault or
change in the operation of such a system, contact your car dealer.
• Make sure cables are placed so that they will not be subject to
mechanical wear and tear (for example, not laid under car seats or
over sharp edges).

■ Update the software

Before you install the car kit, update the software of the car kit to the
latest version.
Download and install the Nokia car kit updater application from
www.nokia.com/support to a compatible computer.
Use a USB data cable that has a standard USB plug at one end and a
micro USB plug at the other end, to connect the car kit display to a
computer. The cable is sold separately.
I n s t a l l a t i o n
31