Nokia Car Kit CK-100 User and Installation Guide 9209908 Issue 2...
Nokia is prohibited. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
Contents For your safety... 4 1. Introduction ... 5 Bluetooth wireless technology ... 5 2. Getting started... 6 Parts ... 6 Input device ... 7 Switch the car kit on or off ... 7 Switch on ... 7 Switch off... 7 Pair and connect with another device...
F o r y o u r s a f e t y For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user and installation guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.
I n t r o d u c t i o n 1. Introduction With the Nokia Car Kit CK-100, you can conveniently make and answer calls hands-free and listen to music from your compatible device. You can operate the car kit using the supplied input device. The car kit also includes voice prompts that guide you in its use.
3. ISO cable CA-135 or CA-152 (not included in all sales packages) 4. Loudspeaker SP-3 (not included in all sales packages) 5. Input device CU-11 with Navi wheel 6. Charging cable CA-134 with a Nokia 2.0-mm (0.08 inch) plug 7. Microphone MP-2 8. CD that contains this user and installation guide...
Bluetooth devices. See the user guide of your device for instructions. 3. Select the car kit (Nokia CK-100) from the list of found devices, or follow the related instructions in the user guide for your device. 4. Enter the Bluetooth passcode 0000 to pair and connect the car kit with your device.
O p e r a t i o n 3. Operation ■ Make a call To make a call, use your mobile phone in the normal way when the car kit is connected to it. (To cancel the call, press the Navi wheel.) Speak towards the car kit microphone.
O p e r a t i o n ■ Manage two calls at the same time To use these features, your mobile phone must support the HFP Bluetooth profile 1.5. To end the current call and activate a call on hold, press the Navi wheel. To end the current call and answer a waiting call, press the Navi wheel.
1. Ensure that the car kit is switched on and connected to your mobile phone. 2. Press and hold the Navi wheel for over 5 seconds when no call is in progress. The car kit plays the name of the currently selected language.
T r o u b l e s h o o t i n g 4. Troubleshooting ■ Connection issues I cannot connect the car kit to my device through a Bluetooth connection. • Ensure that the car kit is switched on and paired with your device. •...
• If the car kit is connected to the supplied loudspeaker, check that the car kit volume is set properly. The car kit does not play sound in stereo. • Check that the car radio is set to receive audio through the stereo input.
T r o u b l e s h o o t i n g ■ Other issues The car kit does not switch on when I turn on the car ignition. Ask the technician who installed the car kit to ensure that the ignition sense wire is properly connected.
Observe the following safety guidelines when installing the car kit: • Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the car kit.
2 ohms. The optimal impedance for the car kit is 4 ohms. If the impedance is over 8 ohms, the output power is significantly lower than normal. For the latest and detailed installation instructions, go to www.nokia.com/support or your local Nokia website.
I n s t a l l a t i o n Use the ISO cable CA-135 or CA-152 When you connect the car kit to the car radio system with the ISO cable CA-135 or CA-152, you can select if the car kit amplifier is used for calls and the car radio amplifier is used for music, or if the car kit amplifier is used for both.
Music played on A2DP devices and Nokia Maps navigation prompts played on some Nokia device models are directed to the AUX input of the car radio. To hear the music and prompts, select AUX input on your...
input, the music and prompts played on these devices cannot be heard through the radio. 1. To connect the ISO cable to the car radio, do as follows: • Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead.
A2DP Bluetooth profile. Music played on A2DP devices and Nokia Maps navigation prompts played on some Nokia device models are directed to the AUX input of the car radio. To hear the music and prompts, select AUX input on the car radio as the audio source.
CU-11 and the microphone MP-2 to the respective connectors on the hands-free unit. To charge a compatible Nokia mobile phone through the car kit, connect one end of the charging cable CA-134 to the hands-free unit and the other end to the 2.0-mm (0.08 inch) charging connector of the mobile phone.
I n s t a l l a t i o n ■ Install the car kit in a vehicle This section describes how to install the car kit parts in a vehicle. The parts are explained in “Parts,” p. 6. When installing the parts of the car kit, ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags).
Hands-free unit HF-22 The hands-free unit has the following connectors: 1. Connector for input device CU-11 2. Connector for charging cable CA-134 (to charge a compatible Nokia phone) 3. Connector for microphone MP-2 4. Mini-USB connector 5. Stereo outputs (standard RCA connectors) for connection to a car radio with appropriate line-in ports.
I n s t a l l a t i o n kit. For an optimal connection, ensure that the distance between the hands-free unit and a metal surface is over 4 mm (0.16 inch). Install the hands-free unit in the car using suitable mounting material (not supplied in the sales package).
Charging cable CA-134 The car kit comes with the charging cable CA-134 that has a 2.0-mm (0.08 inch) charging plug for compatible Nokia devices. The sales package may also include a charging cable that has a micro-USB charging plug for compatible Nokia devices.
I n s t a l l a t i o n ■ Optional accessories You can extend the features of the car kit with optional accessories. Consult your dealer or service technician for suitable accessories for the car kit. Use only approved and compatible accessories. Mobile holder When mounting a mobile holder in your car, ensure that the display of the mobile phone is clearly visible for the user and that the holder does...
Care and maintenance Your device is a product of superior design and craftmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information ■ Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.