First Time Use; Pair And Connect The Car Kit - Nokia CK-200 User And Installation Manual

G e t s t a r t e d
disconnect your device from the car kit (for example, to take it with
you), the car kit automatically switches off after 10 minutes.
Tip: After you turn off the car engine, do not leave the mobile
device connected to the car kit, to prevent accidental draining of
the car battery.

■ First time use

When you switch on the car kit for the first time, you are asked to select
the language to use. Turn the wheel to scroll to the desired language,
and press the wheel.
After the language selection, you are asked to pair and connect the car
kit to a compatible Bluetooth device. See "Pair and connect the car kit",
p. 16.

■ Pair and connect the car kit

Before using the car kit, you must associate (pair) and connect it to a
compatible mobile device that supports Bluetooth wireless technology.
You can pair the car kit with up to eight devices and connect it to two
devices that support the HFP Bluetooth profile at a time.
To pair and connect the car kit to a compatible device:
1. If the car kit has not been previously paired with a device, switch on
the car kit and your device. The car kit enters pairing mode.
If you have previously paired with a device, to pair with another
device, in standby mode, select
Connection manager
2. Within 3 minutes, activate Bluetooth on your device, and set it to
search for Bluetooth devices. For instructions, see the user guide of
your device.
3. On your device, select the car kit (Nokia CK-200) from the list of
found devices.
4. On your device, enter the Bluetooth passcode 0000, to pair and
connect the device to the car kit.
16
Menu >
> Pair new device.
Settings > Connection >