Nokia Multimedia Car Kit CK-20W User and Installation Guide 9245861 Issue 1 EN...
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided “as is”. Except as required by applicable law, no...
For your safety......4 Control your music player....15 Dismiss a calendar event alarm..16 Quick start........ 5 Nokia Navigation Pack LD-2 .... 16 The input device........5 Troubleshooting ........16 Set up a Bluetooth wireless Connection issues ......16 connection..........
F o r y o u r s a f e t y For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Your device and its enhancements may contain small parts. Keep them out of reach of small children.
Q u i c k s t a r t Quick start This section briefly describes the basic features of the car kit. For details, refer to the respective sections in this user guide. ■ The input device Microphone mute key (1) •...
2. Activate the Bluetooth feature on your phone, and set the phone to search for Bluetooth devices. 3. Select the car kit (Nokia CK-20W) from the list of found devices. 4. Enter the Bluetooth passcode 0000 to pair and connect the car kit with your phone.
The Nokia Multimedia Car Kit allows you to conveniently make and answer calls hands-free and use your compatible music player in a car. You can also use the car kit with the Nokia Navigation Pack LD-2 that guides you to your destination with spoken driving instructions and map displays or maneuver icons shown on the screen of your mobile phone.
• Loudspeaker SP-3 (3) • Microphone MP-2 (4) • Power cable PCU-4 (5) • Connectivity cables (6); all the cables are not shown in the figure • GPS receiver (7) is included in the Nokia Navigation Pack LD-2 (sold separately)
G e t s t a r t e d Input device CU-8 • Microphone mute key • Voice dialing key • Call key • End key • Indicator light (5) • Navi wheel (6) ■ Switch the car kit on or off Switch on If the ignition sense wire is not connected, press the Navi wheel if you use a Bluetooth connection, or connect the phone to the car kit using...
G e t s t a r t e d ■ Connect your phone to the car kit You can connect a compatible mobile phone to the car kit using a cable or a Bluetooth connection, depending on how the car kit was installed. See p.
Bluetooth devices. See the user guide of your phone for instructions. 3. Select the car kit (Nokia CK-20W) from the list of found devices. 4. Enter the Bluetooth passcode 0000 to pair and connect the car kit to your phone.
Connect the car kit automatically You can set your phone to allow an automatic connection with the car kit when the car kit is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu.
Connect the car kit manually If you have paired the car kit with a compatible music player (or a compatible Nokia phone with a music player feature), press to make a Bluetooth connection to the paired device when no call is in progress.
O p e r a t i o n 3. Operation ■ Adjust the volume To adjust the car kit volume during a call or while listening to music from your music player, turn the Navi wheel to left or right. ■...
(or phone) for information on the music playback controls. When you have connected the car kit to a compatible music player (or a compatible Nokia phone with a music player feature) through a Bluetooth connection, press to pause or resume music playback. To move to the next or previous track, press the Navi wheel briefly, and within 3 seconds, turn the Navi wheel right or left.
■ Nokia Navigation Pack LD-2 If you use the car kit with this enhancement, you can view map information on the phone display and hear spoken driving instructions from the car kit speaker or car radio system.
O p e r a t i o n My car radio does not have a stereo or auxiliary input. Ask the technician who installs the car kit to use an adapter that allows to connect the stereo outputs of the car kit to some other input on the car radio (such as the cd changer connector) for stereo sound.
22. The car radio is not muted when I answer a call or hear a driving instruction from the Nokia Navigation Pack LD-2. Ask the technician who installed the car kit to ensure that the mute line is properly connected.
Observe the following safety guidelines when installing the car kit. • Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the car kit.
I n s t a l l a t i o n installed where you might come in contact with it in the event of an accident or collision. When mounting a mobile holder, ensure that the phone display is clearly visible for the user.
I n s t a l l a t i o n Bluetooth connection For a Bluetooth wireless connection, the user needs a compatible mobile phone supporting Bluetooth technology. For more information, see p. 10 and 21. Audio connection The audio outputs of the car kit can be connected to the audio inputs of the car radio system in several ways.
I n s t a l l a t i o n • 2—Mono/phone input of the car radio • 3—Stereo/auxiliary input of the car radio • —Mono output of the car kit • —Car kit mute; also see Power cable p. 26 •...
I n s t a l l a t i o n When you switch to the mono mode, the car kit sounds a high beep, and the indicator light flashes slowly for a few seconds. When you switch to the stereo mode, the car kit sounds a low beep, and the indicator light flashes in the rhythm of the beeps.
I n s t a l l a t i o n • —Connector for a connectivity cable • —Connector for the input device CU-8 • —Connector for the GPS receiver • —Stereo audio output for a car radio system •...
I n s t a l l a t i o n on the console between the driver’s and front passenger's seat so that the input device keys are toward the front of the vehicle. To mount the input device, use the hook and loop tape pads supplied with the car kit.
I n s t a l l a t i o n Mount the microphone about 30 cm (11.8 inches) from the driver’s head, and position it so that it points toward the driver’s mouth. Experience has shown that the best mounting locations are near the rear view mirror or the sun visor.
I n s t a l l a t i o n When a call is answered, the car kit switches the yellow wire to ground, muting the car radio. When the call is ended, the yellow wire is separated from ground, and the car radio is unmuted. If the car radio does not have a mute connector, this wire can be left unconnected.
I n s t a l l a t i o n Select the cable with the charging and 3.5-mm audio plugs to connect the car kit to a compatible phone through a Bluetooth connection and to a music player that has a compatible 3.5-mm audio connector. You can connect the charging plug to a compatible phone to charge the phone battery from the car battery while using the car kit.
See Hands-free unit HF-20 p. 23. For information on using the navigation software, see the user guide for the Nokia Navigation Pack LD-2. Antenna coupler and external antenna An antenna coupler can be used to connect an external antenna to the car kit.
C a r e a n d m a i n t e n a n c e Care and maintenance Your car kit is a product of superior design and craftmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information ■ Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.