How To Use - Shark NP320 Series Owner's Manual

How to Use

Fig. 1
Pull out to remove tool caddy
Fig. 3
ASSEMBLING THE LIFT-AROUND
1 Insert the end of the flexible hose into the
connector on the front of the Lift-Around™
Canister Vac. (fig. 1)
2 Insert the removable tool caddy onto the back
of the Canister Vac. (fig. 2) To remove the tool
caddy, hold the vacuum by the handle, pull out
slightly from the right side and then remove it from
the Canister Vac. (fig. 3)
7
TOLL FREE: 1-800-798-7398
Fig. 4
CANISTER VAC
™
3
4
5
Align arrows to attach tool caddy
Power
Button
Fig. 5
Insert the crevice tool, dusting brush, upholstery
brush or power brush into the openings on the tool
caddy. (fig. 4)
Attach the shoulder strap onto the hooks on the
handle of the Canister Vac. (fig. 5)
Empty Dust Cup after cleaning and periodically
during cleaning when it appears full. (See
"Maintenance" section for instructions.)
Fig. 2