Shark Lift-Around NP319 series Owner's Manual
Shark Lift-Around NP319 series Owner's Manual

Shark Lift-Around NP319 series Owner's Manual

Portable vac
Hide thumbs Also See for Lift-Around NP319 series:

Advertisement

NP319 series
OWNER'S GUIDE
www.sharkclean.com
NP319series_40_IB_ENG_120409_4.indd 1
12-04-09 2:11 PM

Advertisement

Table of Contents
loading

Summary of Contents for Shark Lift-Around NP319 series

  • Page 1 NP319 series OWNER’S GUIDE www.sharkclean.com NP319series_40_IB_ENG_120409_4.indd 1 12-04-09 2:11 PM...
  • Page 2: Important Safety Instructions

    TO REDUCE THE RISK OF FIRE, ELECTRIC SHOULD ALWAYS BE OBSERVED, SHOCK OR INJURY: INCLUDING THE FOLLOWING: GENERAL ELECTRICAL SAFETY: READ ALL INSTRUCTIONS BEFORE USING 1. Unplug from electrical outlet when not in use YOUR SHARK LIFT-AROUND PORTABLE ® ™ and before servicing. VAC.
  • Page 3 GENERAL USE: GENERAL CLEANING: 1. Use only as described in this manual. 1. DO NOT pick up large-sized objects. 2. DO NOT put any objects into openings. DO 2. DO NOT pick up hard or sharp objects such as NOT use with any opening blocked; keep free of glass, nails, screws or coins that could damage dust, lint, hair, and anything that may reduce air the vacuum cleaner.
  • Page 4 This manual covers model numbers: NP319 40 NP319E TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz Watts: 550 W Amps: 4.6 A TOLL FREE: 1-800-798-7398 NP319series_40_IB_ENG_120409_4.indd 4 12-04-09 2:11 PM...
  • Page 5: Table Of Contents

    Contents Thank you for Getting Started ................6 purchasing the How to Use ...................8 Shark ® Maintenance ................9 Lift-Around Checking for Blockages ...............11 ™ Portable Vac. Resetting the Motor Thermostat ..........12 Storing ..................12 Troubleshooting Guide ..............13 Warranty & Registration .............15 www.sharkclean.com NP319series_40_IB_ENG_120409_4.indd 5...
  • Page 6: Getting Started

    Getting Started Use the Shark Lift-Around FIRST THING’S FIRST, YOU NEED TO KNOW ® ™ Portable WHAT’S IN THE BOX YOU JUST OPENED: Vac as a stand alone vacuum for spot- Lift-Around Portable Vac ™ cleaning small areas and large piles of debris,...
  • Page 7 DUSTING BRUSH (F) NOTE: Always turn power off before attaching or detaching accessories. Dust shelves, lamp shades, window blinds, books, furniture and other household items. REMOVABLE TOOL CADDY (B) FLEXIBLE HOSE (G) Specially designed to hold the crevice tool, dusting brush and upholstery brush for quick access to With the right cleaning tool in place and the Flexible tools when vacuuming and cleaning around the...
  • Page 8: How To Use

    How to Use Pull out to remove tool caddy Align arrows to attach tool caddy Fig. 1 Fig. 2 Fig. 3 Power Button Fig. 5 Fig. 4 Fig. 6 ASSEMBLING THE LIFT-AROUND PORTABLE VAC ™ Insert the end of the flexible hose into the FOR ADDED COMFORT OR FOR AN EXTENDED connector on the front of the Lift-Around™...
  • Page 9: Maintenance

    Maintenance To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks. Reassemble all parts securely before operating vacuum. CAUTION: For best results empty the Dust Cup Unplug the vacuum; after each use; empty several times failure to do so might during prolonged usage or when it result in electric...
  • Page 10 Maintenance - cont. COMPONENT MAINTENANCE SCHEDULE Dust Cup Empty each time you vacuum. Pre-Motor Foam Filter Rinse and air dry every month under normal use. Pre-Motor Felt Filter Rinse and air dry every month under normal use. Post-Motor HEPA Filter Clean once every 24 months under normal use.
  • Page 11: Checking For Blockages

    Checking for Blockages Locking Latch Turbine Wheel Rotating Fig. 15 Fig. 16 Bristle Brush Blockages may cause your vacuum to overheat and shut down. To prevent this from happening, check potential blockage areas after heavy use or if you CLEANING THE POWER BRUSH detect a loss of suction or poor cleaning performance.
  • Page 12: Resetting The Motor Thermostat

    Storing Resetting the Motor Thermostat Your Shark Lift-Around™ Portable Vac is ® equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power. To reset the Motor Thermostat: Press the Power Button to turn the vacuum off.
  • Page 13: Troubleshooting Guide

    Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS Check Filters to see if they need cleaning. Follow instructions for rinsing and drying the Filters before re-inserting back into the Vacuum. (See “Maintenance” sections for instructions.) Vacuum is not Dust Cup may be full; empty Dust Cup. picking up dirt.
  • Page 14 Notes TOLL FREE: 1-800-798-7398 NP319series_40_IB_ENG_120409_4.indd 14 12-04-09 2:11 PM...
  • Page 15: Warranty & Registration

    Product Registration Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark product within ten (10) ® days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
  • Page 16 Euro-Pro Operating LLC USA: Newton, MA 02459 CAN: 4400 Bois Franc, St-Laurent, QC H4S 1A7 English: 1-800-798-7398 www.sharkclean.com COPYRIGHT© EURO-PRO OPERATING LLC 2012 PRINTED IN CHINA Illustrations may differ from actual product. NP319series.E.120409.4 NP319series_40_IB_ENG_120409_4.indd 16 12-04-09 2:11 PM...

This manual is also suitable for:

Lift-around np319 40Lift-around np319e

Table of Contents