Storing; Resetting The Motor Thermostat; Ordering Replacement Parts - Shark NP320 Series Owner's Manual

Storing

Fig. 20
1
Store the dusting brush, upholstery brush and the
crevice tool on the mounts on the removable tool
caddy. (fig. 20)
2
Wrap the flexible hose around the base of the
vacuum and hook the end of the flexible hose into
the hose dock. (fig. 21) To release the hose, press
the Hose Storage button.
3
Wrap the attached cord strap around the power
cord when storing.
4
Store your vacuum cleaner with the rest of the
accessories safely in a cool dry area where they
will not be a hazard, will not get damaged and will
not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior
to storing. (See "Maintenance" section for
instructions.)

Resetting the Motor Thermostat

Your Shark Lift-Around™ Canister Vac is
®
equipped with a protective Motor Thermostat. If the
motor should overheat, the thermostat shuts off the
power.
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and replace
filter. Refer to Checking for Blockages.
Wait 45 minutes for vacuum to cool; then plug in the
vacuum.
Press the Power Button to restart the vacuum.
Resetting the Motor Thermostat
Your Shark
equipped with a protective Motor Thermostat. If the
motor should overheat, the thermostat shuts off the
power.
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and
replace filter. Refer to Checking for Blockages.
Fig. 21
Wait 45 minutes for vacuum to cool; then plug in the
vacuum.
Press the Power Button to restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.

Ordering Replacement Parts

To order additional parts and accessories, go to
www.sharkninjamanuals.com or call
1-800-798-7398.
PART
Pre-Motor Filters
HEPA Filter
Telescopic Tube
Upholstery Brush
Crevice Tool
Dusting Brush
Power Brush
Floor Kit Handle
Straight Suction Nozzle
Lift-Around™ Canister Vac is
®
www.sharkninjamanuals.com
PART NO.
XFF318
XHF318
1057FT
1061FT
1062FT
1063FT
1064FT
XKH320
XSN320
12