Canon HR10 Instruction Manual page 107

TEMPERATURE TOO HIGH
CANNOT PLAY BACK
CANNOT DIVIDE THE SCENE
PLEASE USE ONLY THE
RECOMMENDED DISCS
DISC IS FINALIZED CANNOT
RECORD
UN FINALIZE THE DISC
DISC IS PROTECTED
CANNOT READ THE DISC
CHECK THE DISC
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
You may not be able to divide very short scenes.
Scenes cannot be divided when the disc already contains 999 scenes.
You may not be able to further divide scenes shorter than 5 seconds that were
created by dividing a previous scene.
The dual-layered disc you inserted cannot be used with this camcorder. 7
You cannot record additional scenes on a finalized DVD-RJDVD-R DL disc.
You cannot record additional scenes or unfinalize a DVD-RW disc (HD quality,
or SO quality (VIDEO mode)) that was finalized using another digital device.
You cannot record additional scenes on a finalized DVD-RW disc (HD quality, or 71
SO quality (VIDEO mode)). Unfinalize the disc first.
The disc is protected. Replace the disc or remove the disc protection. 66
Disc could not be read. Try cleaning it or replace the disc. 111
This message can also appear if condensation has formed. Wait until the 114
camcorder dries completely before resuming use.
This message can also appear if the camcorder has exceeded its operational
temperature. Turn off the camcorder and let it cool down before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it. 32
I
• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC
There was an error when reading the disc or attempting to write onto it. Try
cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
111
114
DISC COVER IS OPEN
The disc may not be loaded correctly. Try removing the disc and reinserting it. 32
Close the disc cover.
DISC MUST BE FINALIZED TO
PLAY BACK IN COMPATIBLE
PLAYERS
NO DISC
Be sure to finalize the disc and check the compatibility of the device before
playing back the disc on external DVD devices.
No disc is loaded. Insert a disc.
68
32
LOADING THE DISC
AVOID MOVING THE CAMCORDER
UNABLE TO RECOVER DATA
This message can also appear if condensation has formed. Wait until the 114
camcorder dries completely before resuming use.
The disc is being read. Wait before you start recording.
Try not to move the camcorder while the image is being recorded.
Could not recover a corrupted file.
This message can also appear if condensation has formed. If you suspect
condensation is the reason, do not initialize the disc and wait until the
camcorder dries completely before resuming use.
114
107
TEMPERATURE TOO HIGH
CANNOT PLAY BACK
CANNOT DIVIDE THE SCENE
PLEASE USE ONLY THE
RECOMMENDED DISCS
DISC IS FINALIZED CANNOT
RECORD
UN FINALIZE THE DISC
DISC IS PROTECTED
CANNOT READ THE DISC
CHECK THE DISC
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
You may not be able to divide very short scenes.
Scenes cannot be divided when the disc already contains 999 scenes.
You may not be able to further divide scenes shorter than 5 seconds that were
created by dividing a previous scene.
The dual-layered disc you inserted cannot be used with this camcorder. 7
You cannot record additional scenes on a finalized DVD-RJDVD-R DL disc.
You cannot record additional scenes or unfinalize a DVD-RW disc (HD quality,
or SO quality (VIDEO mode)) that was finalized using another digital device.
You cannot record additional scenes on a finalized DVD-RW disc (HD quality, or 71
SO quality (VIDEO mode)). Unfinalize the disc first.
The disc is protected. Replace the disc or remove the disc protection. 66
Disc could not be read. Try cleaning it or replace the disc. 111
This message can also appear if condensation has formed. Wait until the 114
camcorder dries completely before resuming use.
This message can also appear if the camcorder has exceeded its operational
temperature. Turn off the camcorder and let it cool down before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it. 32
I
• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC
There was an error when reading the disc or attempting to write onto it. Try
cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
111
114
DISC COVER IS OPEN
The disc may not be loaded correctly. Try removing the disc and reinserting it. 32
Close the disc cover.
DISC MUST BE FINALIZED TO
PLAY BACK IN COMPATIBLE
PLAYERS
NO DISC
Be sure to finalize the disc and check the compatibility of the device before
playing back the disc on external DVD devices.
No disc is loaded. Insert a disc.
68
32
LOADING THE DISC
AVOID MOVING THE CAMCORDER
UNABLE TO RECOVER DATA
This message can also appear if condensation has formed. Wait until the 114
camcorder dries completely before resuming use.
The disc is being read. Wait before you start recording.
Try not to move the camcorder while the image is being recorded.
Could not recover a corrupted file.
This message can also appear if condensation has formed. If you suspect
condensation is the reason, do not initialize the disc and wait until the
camcorder dries completely before resuming use.
114
107