Canon HR10 Instruction Manual page 105

10
There is no sound from the TV. When connecting the camcorder to an HDTV using the CTC-1 OOIS 93
Component Cable, make sure to connect also the audio connections using
•
the white and red plugs of the STV-1 00 Stereo Video Cable.
The camcorder is connected using Disconnect the HDMI cable and then restore the connection or turn the
the HDMI cable, but there is no camcorder off and then on again.
picture or sound from the HDTV.
The disc cannot be recognized by the
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 111
device. Or, even though the disc is
Finalize the disc. 68
read, cannot play back the disc or the
picture is distorted.
DVD-RW discs recorded in SD quality (VR mode) can only be played back
with VR mode-compatible DVD players. Refer to the instruction manual of
your DVD device.
Discs recorded in HD quality can only be played back with AVCHD-
compatible DVD players. Refer to the instruction manual of your DVD
device.
Cannot edit my recordings or add It may not be possible to edit or add recordings with an external DVD
recordings to the disc with the DVD recorder on a disc recorded with this camcorder.
device.
When writing on a disc in this The camcorder has exceeded its operational temperature. Turn off the
camcorder recordings transferred camcorder and let it cool down before resuming use.
from a computer, an error message
appears.
Memory Card Operation
Memory card cannot be inserted. Memory card was not facing the correct direction. Turn the memory card
34
over and insert it.
Cannot record on the memory card. Memory card is full. Erase still images to free some space or replace the 77
memory card.
Memory card was not initialized. Initialize the memory card. 84
The folder and file numbers have reached their maximum value. Set
53
[FILE NOS.] to [RESET] and insert a new memory card.
Still images cannot be captured from the playback scene when [TV TYPE]
53
is set to [NORMAL TV].
Memory card cannot be played back. Insert a memory card.
34
Set the camcorder to
[PLAY' 0 )
mode.
75
Image cannot be erased.
Image is protected. Cancel the protection.
83
cg
appears in red. A memory card error occurred. Turn off the camcorder. Remove and 84
reinsert the memory card and set the camcorder back to
(CAMERA- 0)
mode. If
cg
still appears in red, initialize the memory card.
105
10
There is no sound from the TV. When connecting the camcorder to an HDTV using the CTC-1 OOIS 93
Component Cable, make sure to connect also the audio connections using
•
the white and red plugs of the STV-1 00 Stereo Video Cable.
The camcorder is connected using Disconnect the HDMI cable and then restore the connection or turn the
the HDMI cable, but there is no camcorder off and then on again.
picture or sound from the HDTV.
The disc cannot be recognized by the
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 111
device. Or, even though the disc is
Finalize the disc. 68
read, cannot play back the disc or the
picture is distorted.
DVD-RW discs recorded in SD quality (VR mode) can only be played back
with VR mode-compatible DVD players. Refer to the instruction manual of
your DVD device.
Discs recorded in HD quality can only be played back with AVCHD-
compatible DVD players. Refer to the instruction manual of your DVD
device.
Cannot edit my recordings or add It may not be possible to edit or add recordings with an external DVD
recordings to the disc with the DVD recorder on a disc recorded with this camcorder.
device.
When writing on a disc in this The camcorder has exceeded its operational temperature. Turn off the
camcorder recordings transferred camcorder and let it cool down before resuming use.
from a computer, an error message
appears.
Memory Card Operation
Memory card cannot be inserted. Memory card was not facing the correct direction. Turn the memory card
34
over and insert it.
Cannot record on the memory card. Memory card is full. Erase still images to free some space or replace the 77
memory card.
Memory card was not initialized. Initialize the memory card. 84
The folder and file numbers have reached their maximum value. Set
53
[FILE NOS.] to [RESET] and insert a new memory card.
Still images cannot be captured from the playback scene when [TV TYPE]
53
is set to [NORMAL TV].
Memory card cannot be played back. Insert a memory card.
34
Set the camcorder to
[PLAY' 0 )
mode.
75
Image cannot be erased.
Image is protected. Cancel the protection.
83
cg
appears in red. A memory card error occurred. Turn off the camcorder. Remove and 84
reinsert the memory card and set the camcorder back to
(CAMERA- 0)
mode. If
cg
still appears in red, initialize the memory card.
105