Canon HR10 Instruction Manual page 22

Hide thumbs Also See for HR10:
Table of Contents

Advertisement

Introduction
QJ)
24F
progressive frame rate
When recording in high definition, select the 24F
progressive frame rate to give your recordings a
cinematic look
(CD
49). You can combine this
frame rate with the [[]I CINE MODE] recording
program
(CD
55) to enhance the effect.
@ Disc operation
e
Record,
e ..
Record pause,
~
Playback, •• Playback pause,
~
Fast playback,
~
Fast reverse playback,
I
~
Slow playback,
•• Slow reverse playback
@
Remaining recording time
When there is no more disc space available,
"~END"
will be displayed and the recording
will stop.
@ Recording reminder
The camcorder counts from 1 to 10 seconds
when you start recording. This is helpfUl to avoid
scenes that are too short.
@
Number of still images available on the card
~
flashing in red: No card
[] in green: 6 or more images
[] in yellow: 1 to 5 images
[] in red: No more images can be recorded
22
• When viewing the still images, the display will
always be in green.
• Depending on the recording conditions, the
number of available still images displayed may
not decrease even after a recording has been
made, or may decrease by 2 still images at
once.
Card access display
~
is displayed next to the number of images
available while the camcorder is writing on the
memory card.
@l
Remaining battery charge estimate
• When
Cs;J
is displayed in red, replace the
battery pack with a fully charged one.
• When you attach an empty battery pack, the
power may turn off without displaying
Cs;J.
• Depending on the conditions under which the
camcorder and the battery pack are used, the
actual battery charge may not be indicated
accurately.
®
Image number
The image number indicates the name and
location of the file on the memory card. For
example, the file name of image
101-0107
is
"IMG_0107.JPG",stored under the folder
u
DCIM\ 101 CANON".
Introduction
QJ)
24F
progressive frame rate
When recording in high definition, select the 24F
progressive frame rate to give your recordings a
cinematic look
(CD
49). You can combine this
frame rate with the [[]I CINE MODE] recording
program
(CD
55) to enhance the effect.
@ Disc operation
e
Record,
e ..
Record pause,
~
Playback, •• Playback pause,
~
Fast playback,
~
Fast reverse playback,
I
~
Slow playback,
•• Slow reverse playback
@
Remaining recording time
When there is no more disc space available,
"~END"
will be displayed and the recording
will stop.
@ Recording reminder
The camcorder counts from 1 to 10 seconds
when you start recording. This is helpfUl to avoid
scenes that are too short.
@
Number of still images available on the card
~
flashing in red: No card
[] in green: 6 or more images
[] in yellow: 1 to 5 images
[] in red: No more images can be recorded
22
• When viewing the still images, the display will
always be in green.
• Depending on the recording conditions, the
number of available still images displayed may
not decrease even after a recording has been
made, or may decrease by 2 still images at
once.
Card access display
~
is displayed next to the number of images
available while the camcorder is writing on the
memory card.
@l
Remaining battery charge estimate
• When
Cs;J
is displayed in red, replace the
battery pack with a fully charged one.
• When you attach an empty battery pack, the
power may turn off without displaying
Cs;J.
• Depending on the conditions under which the
camcorder and the battery pack are used, the
actual battery charge may not be indicated
accurately.
®
Image number
The image number indicates the name and
location of the file on the memory card. For
example, the file name of image
101-0107
is
"IMG_0107.JPG",stored under the folder
u
DCIM\ 101 CANON".

Advertisement

Table of Contents
loading

Table of Contents