Photos; Basic Recording; Taking Photos - Canon HR10 Instruction Manual

Photos
Refer to this chapter for details on shooting photos - from capturing
and playing back images to printing them.
Basic Recording
Taking Photos
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (CO 84).
3
Press
[PHOTO
I
halfway.
• Once the focus is automatically
adjusted, 0 will turn green and
one or more AF frames will appear.
• When you press
[PHOTO]
on the
wireless controller, the still image is
recorded immediately.
4
Press
[PHOTO
I
fully.
The CARD access indicator will flash
as the still image is being recorded.
o
IMPORTANT
ICA~RAII
(CO
26)
Avoid the following actions while the card
access display (~ []) appears on screen,
and when the CARD access indicator is on
or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
~~
/0
switch or the operating mode.
CD
NOTES
1
Move the
~
switch to ON to
set the camcorder in CAMERA
mode.
The red CAMERA indicator will turn
on.
2
Move the -"/0 switch to 0 (Still
images).
72
• If the subject is not suitable for
autofocus,
0
turns yellow. Adjust the
focus manually (CO 59).
• When the subject is too bright,
"OVEREXP." starts flashing. In such
case, use the optional FS-H37U
NO filter.
Photos
Refer to this chapter for details on shooting photos - from capturing
and playing back images to printing them.
Basic Recording
Taking Photos
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (CO 84).
3
Press
[PHOTO
I
halfway.
• Once the focus is automatically
adjusted, 0 will turn green and
one or more AF frames will appear.
• When you press
[PHOTO]
on the
wireless controller, the still image is
recorded immediately.
4
Press
[PHOTO
I
fully.
The CARD access indicator will flash
as the still image is being recorded.
o
IMPORTANT
ICA~RAII
(CO
26)
Avoid the following actions while the card
access display (~ []) appears on screen,
and when the CARD access indicator is on
or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
~~
/0
switch or the operating mode.
CD
NOTES
1
Move the
~
switch to ON to
set the camcorder in CAMERA
mode.
The red CAMERA indicator will turn
on.
2
Move the -"/0 switch to 0 (Still
images).
72
• If the subject is not suitable for
autofocus,
0
turns yellow. Adjust the
focus manually (CO 59).
• When the subject is too bright,
"OVEREXP." starts flashing. In such
case, use the optional FS-H37U
NO filter.