Installing With Custom Install - Kyocera ECOSYS P6035cdn Printer Driver User Manual

Installation

Installing with Custom Install

1
2
3
4
5
6
7
8
9
10
11
1-5
If the installer cannot find your printing system, contact your system
administrator.
Note: You must install .NET Framework 4.0 or later to use Status Monitor.
Ensure that your printing system and computer are turned on and connected by
USB or network cable.
In the Product Library window, click Custom Install.
To discover a printing system, proceed to step 3. To add a printing system
model and port name, proceed to step 5.
In the Custom Install window, the installer searches for your printing device.
Each discovered printing system is displayed in the Devices list as an icon with
a model name and port name. To view the list without icons, under the Devices
list click the Switch to list view icon. Under the Devices list you can also click
one of the icons to select all devices, or clear all devices. If your printing device
is not discovered, proceed to step 5.
Select a printing device from the Devices list, and click the arrow to move it to
the Products to Install list. Proceed to step 6.
If discovery does not find your printing device, you can add it. Click the Add
custom device icon.
In the Devices dialog box, select from the Model list of supported models, and
the Port name list of all local and network ports. To add a port connected to
your system, click Add Port. Click OK in the Devices dialog box. The printing
device appears in the Products to Install list.
Select a driver from the Drivers list, and click the arrow to move it to the
Products to Install list. One or more drivers are required to enable the Install
button.
Select a utility from the Utilities list, and click the arrow to move it to the
Products to Install list. If a more recent version of a utility is installed, the utility
is disabled in the list and shows a message that a newer version is installed.
If you want to remove a product from the Products to Install list, select it and
click Remove at the bottom of the list box. To remove all products, click
Remove all.
You can select Use host name as port name to use a host name for the
Standard TCP/IP port. (Not available with a USB connection.)
For each printing device and driver combination in the Products to Install list,
you can click the Edit icon to open a dialog box with installation options for the
drivers. Make your selections from the available options.
Review your settings. At least one printing system, driver, or a utility, must be
selected to enable the Install button. If your settings are correct, click Install.
User Guide