Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen.
You will see the following screen when the new device has successfully connected to the network.
Note:
1)
The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2)
The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
5.5 Working Mode
The Router supports five operation mode types: Wireless Router, Access Point, Repeater,
Client and Wireless Client Router. Please select one you want. Click Save to save your choice.
The WPS Configuration Screen of Wireless Adapter
- 107 -