Network; Wan - TP-Link TL-WR710N User Manual

4.6 Network

There are three submenus under the Network menu: WAN, MAC Clone and LAN. Click any of
them, and you will be able to configure the corresponding function.

4.6.1 WAN

Choose menu "Network → WAN", and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follow:
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP
parameters from your ISP. Click the Release button to release the IP parameters.

MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
- 36 -