Rule List - TP-Link TL-WR710N User Manual

8.14.2 Rule List

Choose menu "Bandwidth Control → Rule List", you can view and configure the Bandwidth
Control rules in the screen below.

Description - This is the information about the rules such as address range.

Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.

Ingress Bandwidth - This field displays the max and mix download bandwidth through the
WAN port, the default is 0.

Enable - This displays the status of the rule.

Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New..., you will see the following screen.
Step 2: Enter the information like the screen shown below.
 Enable - Enable or disable the rule.
 IP Range - Interior PC address range. If both are blank (or 0.0.0.0), the domain is no
effective.
- 237 -