Chapter 3. Quick Installation Guide; Tcp/Ip Configuration - TP-Link TL-WR710N User Manual

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your router using Quick Setup
Wizard within minutes.

3.1 TCP/IP Configuration

The default IP address is 192.168.0.254. And the default Subnet Mask is 255.255.255.0. These
values can be changed as you desire. In this guide, we use all the default values for description.
Connect the local PC to the LAN port of the Router. And then you can configure the IP address for
your PC as the following steps:
1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If
you need instructions as to how to do this, please refer to
2) Then the built-in DHCP server will assign IP address for the PC.
Then connect to the Router through wireless connection following the steps below:
1) Click the icon
default SSID of the Router. Click Connect.
at the bottom of your desktop. Click refresh button, and then select the
Appendix B: "Configuring the PC".
- 9 -