Wireless Security - TP-Link TL-WR710N User Manual

Enable Wireless Radio - The wireless radio of the Router can be enabled or disabled to

allow wireless stations access. If enabled, the wireless stations will be able to access the
Router. Otherwise, wireless stations will not be able to access the Router.
Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless

router will broadcast its name (SSID) on the air.
Be sure to click the Save button to save your settings on this page.

Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.

In an elevated location such as a high shelf.

Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
Away from large metal surfaces.

2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.

5.7.2 Wireless Security

Choose menu "Wireless → Wireless Security", and then you can configure the security
settings of your wireless network.
There are three wireless security modes supported by the Router: WPA/WPA2-Personal,
WPA/WPA2-Enterprise and WEP (Wired Equivalent Privacy).
- 111 -