Vivotek FD8136 User Manual page 29

Buttons Configuration
Click the Configure Buttons button, a window will prompt as shown below� Please follow the steps
below to configure your joystick buttons:
1� Select a button number from the Button # pull-down menu�
2� Select a corresponding action, such as Patrol or Preset#�
Tips
If you are not sure of the locations of each
button, use the Properties window in the Game
Controllers utility�
3� Click the Assign button to assign an
action to the button� You can delete an
association by selecting a button number,
and then click the Delete button�
Repeat the process until you are done
with the configuration of all preferred
actions�
The buttons you define should appear on
the button list accordingly�
4� Please remember to click the Save
button on the Client settings page to
preserver your settings�
VIVOTEK
User's Manual - 29