Vivotek FD8136 User Manual page 193

integer>
Return Code
400 Bad Request
415 Unsupported Media Type
8.24 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value
>&mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<val
ue>&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4
_bitrate=<value>&mpeg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value
>& h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>&
h264_bitrate=<value>& h264_maxframe=<value>]
<product dependent>
PARAMETER
codectype
solution
mjpeg_quant
accept at least.
(Used by forcechk)
Description
Request is rejected because some parameter values are illegal.
Returned, if forcechk appears, when minsft is not achievable or
the timeshift feature of the target stream is not enabled.
VALUE
mjpeg, mpeg4, h264
<product dependent>
capability_videoin_resolution <product
0, 1~5
99, 1~5
<product dependent>
DEFAULT DESCRIPTION
N/A Set codec type for Anystream.
Video resolution in pixels.
dependent>
3 Quality of JPEG video.
0,99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
<product dependent>
84
VIVOTEK
User's Manual - 193