Lcd Indication - JUKI MO-2000QVP Instruction Manual

LCD indication

Set values of 15 different kinds of stitch can be visually checked on the LCD screen.
In addition, three different set values can be added to the current set value.
(Memory number)
Stitch No.
Memory No.
1. Basic method of use
No. Operation
1 When the power
is turned ON
2 4 seconds later
3
When is
pressed
4
When or
is pressed
29
Display
"Welcome" display
Sewing type name display screen
Set value display screen
Sewing type name display screen
Set value display screen
Sewing type name display screen
Set value display screen
Needle position
Left needle thread tension
Right needle thread tension
Upper looper thread tension
Lower looper thread tension
Upper knife
Upper knife release
2/3 thread changeover attachment
Roll hem selection lever
Differential feed
Stitch length
Cutting width
Remarks
You can select language from 9
languages. Refer to page 32. (Default
setting is English.)
The screen which was displayed at
the last time when the power was
turned OFF.
The screen is changed over between
the sewing type name display screen
and the set value display screen.
Select the stitch type.
Select the set value.
Edit button
Confirmation button
Default button
LCD indication button
2/3thread changeover
attachment
To release the
attachment
To set the attach-
ment
Roll hem selection
lever
Press the lever away
from you to let the
roll hemming claw
come out.
Pull the lever toward
you to lower the roll
hemming claw.