Waste Collector; Thread, Cones, Spools - JUKI MO-2000QVP Instruction Manual

Preparing the machine / Using the machine
Thread / cones /
spools
The anti-vibration cone
should be used with the
wider edge at the bottom on
the spool holder pin when
sewing with cones.
Household spools
Remove the anti-vibration
cones. Place spools on
spool holder pins and push
the spool caps on with the
rounded side downwards.

Waste collector

Clip the waste collector into the opening on the looper cover.
It catches the cut-off fabric as you sew, keeping your working
area neat and tidy.
Large spools
If large industrial spools are
used, position the anti-vibra-
tion cone upside down on the
spool holder pin, i .e. with the
wider edge at the top.
Thread net
If the threads slip and get
twisted, cover the looper
spools with the net supplied in
the accessory bag.
8