Gathering; Roll Hemming; Presser Foot Pressure - JUKI MO-2000QVP Instruction Manual

Adjustments and settings
C
D
M
H
L
15

Gathering

Using the differential feed, a single layer of fabric can be
gathered before sewing it to the garment.
For example, sleeve heads and lower edges, yokes, lace
edging or frills.
Adjustment:
• Stitch: 4-thread overlock
• Differential feed: 2
• Stitch length: 3-4
• Cutting width: 2-3
Increase the needle thread tension (6-8) for a tighter gather.

Roll hemming

• Turn the handwheel towards you until the needles are fully
raised.
• For roll hemming, pull the overlocking width changeover
knob toward you and check that the overlocking claw re-
tracts. (C).
• For overlocking, push the overlocking width changeover
knob away from you to check that the overlocking claw proj-
ects. (D).
The roll hemmer is fully integrated in the machine. The edge
of the fabric will be automatically rolled over, producing a very
narrow, fine seam or hem.
Roll hemming is ideal for finishing edges on all fine fabrics,
such as evening clothes, lingerie, scarves, frills and also for
curtains and napkins.

Presser foot pressure

The presser foot pressure is factory adjusted to a medium
setting.
Align the marker line on the presser foot pressure regulating
knob with the upper end of the top cover.
Position of knob for normal pressure
(M) = Medium.
More pressure: for thick or stiff fabrics such as denim, tweed,
firm linen (H) = High.
Less pressure: for light-weight or sheer fabrics and knits (L) =
Low.