POSITIONING THE HANDLEBAR
See Figure 5.
1. Align the holes on the middle handle with the holes on the lower handle. Insert the bolts, and tighten them
using the wing nuts provided.
2. Align the holes on the upper handle with the holes on the middle handle. Insert the bolts, and tighten
them using the wing nuts provided.
NOTE: The upper handle can be set at 3 different height levels for increased user comfort.
3. Assembling the Battery clip. Insert the battery clip between battery and plastic enclosure.
Safety Key
ASSEMBLY
Upple handle
Middle handle
Lower Handle
Wing nuts
and bolts
Battery clip
10
Fig. 5