Assembly - Yardworks 60-3815-0 Owner's Manual

ASSEMBLY

INSTALLING THE EDGING BLADE
See Figure 9.1-9.2
1. Place the left edging wheel (2) onto the shaft, and then place the edging blade (3) onto the shaft, with the flute of
the blade facing in toward the gear box. Insert the hitch pin into the holes in order to secure the blade to the shaft.
2. Place the right edging wheel (1) onto the shaft. Insert the hitch pin into the holes in order to secure the wheel to
the shaft.
FRONT
FLUTE
SHAFT
HITCH
1 GEAR BOX
HITCH
PIN
2
PIN
3
Fig. 9.1
FLUTE
SHAFT
3
2
GEAR BOX
Fig. 9.2
1
13