Symbols - Yardworks 60-3815-0 Owner's Manual

Some of the following symbols may appear on this tool. Study them carefully and learn their meaning. Proper
interpretation of these symbols will allow for better and safer operation of the tool.
SYMBOL
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Alternating Current
Direct Current
n o No Load Speed
Class II Construction
.../min Per Minute
Wet Conditions Alert
Read the Owner's Manual
Eye Protection
Safety Alert
Keep Bystanders Away
50' 15 m
Cutting Hazard
Hot Surface

SYMBOLS

NAME DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits, etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, the user must read and
understand the Owner's Manual before using this product.
Always wear safety goggles, safety glasses with side shields, or
a full face shield when operating this product.
Precautions that involve your safety.
Keep all bystanders at least 50' (15 m) away.
Keep feet and hands away from rotating tines.
To reduce the risk of injury or damage, avoid contact with any
hot surface.
5