Makita BHR200 Instruction Manual page 8

1
1. Foot
2. Battery cartridge
1
2
1. Foot
2. Screw
3. Battery cartridge
ASSEMBLY
1
1. Side grip
2
1
1. Bit shank
2. Bit grease
8
Foot
004215
Remove the foot when you use the battery cartridge BH2420.
This will help to place the tool steady.
2
Install the foot when you use the battery cartridge BH2433.
004216
This will help to place the tool steady.
3
CAUTION:
• Always be sure that the tool is switched off and the battery cartridge is
removed before carrying out any work on the tool.
Side grip
003141
CAUTION:
• Always use the side grip to ensure operating safety when drilling in
concrete, masonry, etc.
The side grip swings around to either side, allowing easy handling of the tool in
any position. Loosen the side grip by turning it counterclockwise, swing it to
the desired position and then tighten it by turning clockwise.
Installing or removing the bit
003150
Clean the bit shank and apply bit grease before installing the bit.