Maintenance - Shark NV500NZ Owner's Manual

HELPFUL TIPS
SUCTION CONTROL
1 This unit is equipped with a suction control collar to help with push and pull on high pile carpets, area rugs and to release suction when dusting delicate objects or
drapery. Located at base of top handle, rotate the collar 90° to minimize suction. Be sure to close again for maximum suction.
POWER BUTTONS
2 The POWER button turns on suction only. This is ideal for use on bare floors, delicate area rugs and for use with accessories.
3 The BRUSHROLL button spins the floor brush, ideal for use on carpeted surfaces. Note: The floor brush will only spin once the vacuum is reclined back.
CORD HOOKS
4 For quick cord access, rotate upper hook 180° and remove cord. Rotate it back for cord storage.
HEADLIGHTS
5 Designed to illuminate debris in dark areas, the headlights illuminate any time the power is on. The headlights are long-lasting and designed to last the life of the
vacuum.
HEIGHT ADJUSTMENT
6 This power nozzle has been optimized to work on all types of carpets as well as bare floors so there is never any need to adjust heights for different surfaces.
FILTERS
7 Remember to clean your filters regularly under normal use. Also, for optimal performance, tap clean filters between washes as needed.
1 2
3
1 2
5
4
A U S T: 1 8 0 0 8 9 0 8 4 0

MAINTENANCE

EMPTY THE DUST CUP
1
2
3
CLEAN THE FILTERS
See cleaning schedule on page 2
4
5
1
7
Pull up on the dust cup release latch and lift the dustcup off the pod.
Holding the dust cup over a garbage bag or can, press the bottom empty release latch.
Press the top dust cup release latch to access the dust screen and remove built-up debris as required. With the dust screen removed, turn the dust cup over and
empty the upper chamber by holding it by the recessed handle underneath the dust cup.
With the dust cup removed, remove and rinse the foam and felt filters every three months. Hand wash only. Let air dry completely before replacing. Tap loose dirt
off filters between washes as needed.
Once a year open the filter grill and remove and rinse the HEPA filter. Let air dry completely before re-inserting. Hand wash only.
3
2
N Z : 0 8 0 0 0 0 2 9 9 9
4
Foam
XDF500
Felt
XHF500
HEPA
5
1 3