Switching The Alarm Off; Sleep Timer - Silvercrest SRW 250 A1 User Manual And Service Instructions

SRW 250 A1 Alarm Clock Radio

Switching the alarm off

When the alarm starts, you can disable it as follows.
 Press the ON/OFF button [2] to stop the alarm. The alarm is switched
off until the next day.
 or
 Press the SNOOZE/SLEEP button [9] to delay the alarm for approx.
6 minutes. After this period, the alarm starts again.

Sleep Timer

The sleep timer powers the device off automatically after a set time.
 While the device is powered on or off, press the SNOOZE/SLEEP
button [9]. The number "60" appears on the display to indicate that
the device will power off automatically after 60 minutes.
 Press the SNOOZE/SLEEP button [9] multiple times to decrease the
countdown time shown. Each press of the button reduces the time by
10 minutes.
 If "OFF" is shown on the display [10], the sleep timer is disabled and
the device will stay on. You can press the SNOOZE/SLEEP button [9]
again to select the delay time from the beginning.
124 - English
While SNOOZE is enabled, the corresponding alarm
LED [19, 20, 21 or 22] will flash.