Programming Alarm Times; Switching The Alarm Function On - Silvercrest KH 2190 Operating Instructions Manual

Handling and operation

Programming alarm times

When programming the alarm times, you can select whether,
at the programmed time, alarm tones should sound or the radio
should start playing. Two diff erent alarm times (Alarm 1/Alarm 2)
can be programmed.
Press and hold the AL.1 button
Press and hold the UP button
the time.
Release the AL.1 button
alarm time is displayed in the display
time is automatically taken over as soon as the AL.1 button
resp. AL.2 button
NOTE
► If you wish to check the programmed alarm time, press the
AL.1 button
alarm time appears in the display
resp. AL.2 button
15

Switching the alarm function on

Place the OFF AL1/2 AL2 AL1 switch
The alarm function is now activated. As a control, a point appears
in the display
KH 2190
9
resp. AL.2 button
15
is released.
14
resp. the AL.2 button
15
to return to the current time display.
14
to the left or right.
4
resp. AL.2 button
15
resp. DOWN button
14
. The programmed alarm
4
. The programmed
14
. Release the AL.1 button
4
in the desired position.
.
14
to set
8
when the desired
15
GB
IE
13