Automatic Station Search; Selecting A Saved Station - Silvercrest SRW 250 A1 User Manual And Service Instructions

Automatic Station Search

If you do not want to set the stations manually, you can have the device
search for them automatically. Proceed as follows:
 Power the device on by pressing the ON/OFF button [2].
 Press and hold the PRESET button [6] for approx. 4 seconds. The
search is started and any stations found are saved automatically.
 Press the PRESET button [6] again to cancel the search.

Selecting a Saved Station

 To select a station from a preset, the device has to be powered on. If
it is powered off, press the ON/OFF button [2] to power the device
on.
 Press the PRESET button [6] briefly. The current station preset (P01 to
P20) selected is shown.
 Press the – [7] or + [8] button to select a different station (preset).
Please note that a maximum of 20 stations can be saved.
If more than 20 stations are found, only the first 20 are
saved.
SRW 250 A1 Alarm Clock Radio
English - 121