Last Number Dialed; Leave Word Calling(Lwc) - AT&T definity 7444 User Manual

Last Number Dialed

To automatically redial
the last number you
dialed (extension,
outside number, or
trunk/feature code)

Leave Word Calling(LWC)

To leave a message
after dialing an
extension (when call is
not answered, or you
hear a coverage or
busy tone)
Note: You must have a
 LWC 
button.
To leave a message
without ringing an
extension
1 Press
 Last Dialed 
(while off-hook)
or dial Last Number Dialed code (while off-hook)
Note: This code is unique to your system and must be
obtained from your System Manager.
Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and System
85 R2V4 and some R2V3 systems. Check with your
System Manager to learn if the feature is available on
your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are NOT retained in
memory and must be redialed for each call.
1 Press  LWC  any time after you complete dialing
Message light on called telephone goes on (if so
equipped)
Note: If reorder tone is heard, message is not stored;
try again.
1
Press  LWC 
or dial Leave Word Calling code
Note: This code is unique to your system and must be
obtained from your System Manager.
2 Dial extension
Message light on called telephone goes on (if so
equipped)
3
Hang up or press
[confirmation tone]
[confirmation tone]
 Drop 
[ _ ]
[ _ ]
[dial tone]
21