Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Route the display cable through the routing guides on the display bezel.
2
Adhere the touch-screen board to the display bezel.
3
Connect the touch-screen board cables to the touch-screen board.
4
Adhere the tapes to the touch-screen board cable and the touch-screen
board.
5
Slide the display cable into the connector on the display panel and press
down the latch to secure the cable.
Post-requisites
1
Replace the
Windows-button
2
Follow the procedure from step 1 to step 2 in
3
Follow the procedure from step 4 to step 5 in
panel".
4
Replace the
display
5
Replace the battery.
6
Replace the
base
94
computer. After working inside your
board.
assembly.
cover.
After working inside your
"Replacing the
"Replacing the display
camera".