Removing The Display Hinges; Prerequisites; Procedure - Dell 13 7000 series Service Manual

Removing the display hinges

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Remove the
4 Follow the procedure from step 1 to step 2 in
panel".

Procedure

1 Place the display-back cover and antenna assembly on a flat surface.
2 Remove the antenna cables from the routing guide on the hinge cover.
3 Remove the screws that secure the display hinges to the display back-
cover and antenna assembly.
4 Peel off the tapes that secure the display hinges to the display back-cover
and antenna assembly.
computer. After working inside your
base cover.
display assembly.
After working inside your
"Removing the display
81