Replacing The Windows-Button Board; Procedure; Post-Requisites - Dell 13 7000 series Service Manual

Replacing the Windows-
button board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the Windows-button board cable into the connector on the
Windows-button board and press down the latch to secure the cable.
2 Adhere the tape to the connector on the Windows-button board.
3 Turn the Windows-button board and align the screw hole on the
Windows-button board with the screw hole on the display bezel.
4 Replace the screw that secures the Windows-button board to the display
bezel.
5 Turn the display-panel assembly over.

Post-requisites

1 Follow the procedure from step 4 to step 5 in
panel".
2 Replace the display
3 Replace the battery.
4 Replace the base
computer. After working inside your
assembly.
cover.
After working inside your
"Replacing the display
89