Replacing The Camera; Procedure; Post-Requisites - Dell 13 7000 series Service Manual

Replacing the camera

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Connect the camera cable to the camera module.
2 Using the alignment post place the camera module on the display bezel
and snap it into place.

Post-requisites

1 Follow the procedure from step 4 to step 5 in
panel".
2 Replace the display
3 Replace the battery.
4 Replace the base
86
computer. After working inside your
assembly.
cover.
After working inside your
"Replacing the display