Sony F35 Operation Manual page 77

PAINT menu
Page title & No.
purpose
<SCENE FILE> P16
[ - - ]
Storing and
retrieving scene
files (data set by the
PAINT menu)
Noise Suppression
This function you can enable on the PAINT menu <NOISE
SUPPRESS> page effectively suppresses noise components
while maintaining fine edge components of a subject.
As the noise suppression function of this camera employs a
system to extract and depress noise within a frame, it also
shows strong characteristics for movement of a subject
compared with noise reduction that uses frame correlation.
You can select from among 4 effect levels; LOW (30%), MID
(60%), HIGH (90%), MAX (100%).
LOW: To mainly cut noise components in the high range
MID: To mainly cut noise components in the high and middle
ranges
HIGH: To mainly cut noise components in the high, middle,
and low ranges
MAX: To mainly cut noise components in the high, middle,
and low ranges
The % values are references of the effect when assuming the
maximum is 100%.
Note
This function somewhat affects frequency components of
actual images, and the contours of low-luminance blocks may
be weakended. A preliminary test shooting is recommended
to check in advance.
Item Default
1
2
3
4
5
01
STORE
STANDARD
READ (MStCAM)
WRITE
(CAMtMS)
FILE ID
CAM CODE
DATE
Settings Remarks
When storing a file in camera
memory, specify the number
before executing STORE.
When reading, only specify
the number.
01 to 32 To specify the scene file
number 01 to 32 when 32
SCENE FILE of <OTHERS 2>
of the MAINTENANCE menu
is ON.
Execute by ENTER.
Execute by ENTER. To read the standard paint
data
Execute by ENTER. To load scene files from a
"Memory Stick" to internal
memory
Execute by ENTER. To write scene files in the
camera's memory to a
"Memory Stick"
Max.14 characters Enter a comment for the
scene files to be written to a
"Memory Stick."
Camera code display only (When files made
on are detected, "F35" is
displayed.)
Date of file creation display only
77
Menu List