Using A Usb Wireless Lan Module; Attaching The Ifu-Wlm3 - Sony PMW-F55 Operating Instructions Manual

To update the managerial file
If clips cannot be played back, updating the
managerial file on the card may improve the
situation. For this operation, use "Update Media"
(page 86) of the Media menu.
Using a USB Wireless
LAN Module
You can make the Wi-Fi connection between the
camcorder and a device such as a smartphone,
tablet, etc., by attaching the supplied IFU-WLM3
USB wireless LAN module.
Note
• The IFU-WLM3 USB Wireless LAN Module
(supplied) may not be available in some countries/
regions.
• Attach/remove the IFU-WLM3 after the camcorder is
turned off.
• If you use a wireless device near the camcorder, the
camcorder may not work correctly. Turn the wireless
device off near the camcorder.
• You cannot use a USB wireless LAN module other
than the IFU-WLM3.
• Depending on the Wi-Fi signal condition in the use
environment or the position of the Wi-Fi device and
camcorder, the Wi-Fi connection may not be
established. In this case, fix the IFU-WLM3 to the
screw hole (1/4 inch) on the handle of the camcorder
by using the supplied USB extension cable.
Making a Wi-Fi connection between a device and
the camcorder enables you to do the following.
• Operate the setup menu
• Record and playback the camcorder
• Display the current status of the camcorder
• Switch between the recording settings and
system settings
• Operate the assignable buttons of the camcorder

Attaching the IFU-WLM3

1
Open the cover of the USB wireless
LAN module retracting part (page 13).
2
Insert the IFU-WLM3 to the USB
connector.
3
Close the cover.

Using a USB Wireless LAN Module

35