Vf Menu - Sony PMW-F55 Operating Instructions Manual

VF Menu

When there is a button or dial that corresponds to the menu item on the attached viewfinder, that item is
not available.
VF
Menu items Sub items and setting values Contents
VF Setting Color
Setting the
viewfinder
Contrast
Brightness
Color Mode
Aspect
Double Speed Drive
Peaking
Setting
Setting the peaking
function
Peaking Type
Frequency
Normal Peaking Level
Color
Color Peaking Level
80 Setup Menu List
–99 to +99 (±0)
–99 to +99 (±0)
–99 to +99 (±0)
Color / B&W
Auto / Full / Anamo ×1.3 /
Anamo ×2
On / Off
On / Off
Normal / Color
Normal / High
0 to 99 (50)
B&W / Red / Yellow / Blue
0 to 99 (50)
Adjusts the color of pictures on the viewfinder.
Adjusts the contrast of pictures on the viewfinder.
Adjusts the brightness of pictures on the viewfinder.
Selects the display mode of the viewfinder while E-E display/
recording.
Selects the displayed area of pictures for the viewfinder.
Anamo ×1.3 / Anamo ×2: Corrects the distortion of the
images on the viewfinder screen when using an anamorphic
lens. (This setting is available only when "Main Operation" in
"Base Setting" of the System menu is set to "RAW.")
Turns on/off the function that doubles the frame rate for the
viewfinder display when the system frequency is 23.98, 24,
25, or 29.97.
(When this function is set to "On," the settable range for
"Shutter Value" in "Shutter" of the Camera menu is limited to
180 degrees for the shutter angle.)
Notes
This function is not available on the following settings.
• System frequency is 50 or 59.94.
• "Setting" in "S&Q Motion" of the Camera menu is set to
"On."
• "Setting" in "Slow Shutter" of the Camera menu is set to
"On."
• Recording format is set to SStP SR-SQ 444/SStP SR-Lite
422/SStP SR-SQ 422.
• During playback or displaying thumbnail.
Turns the peaking function on/off.
Selects the peaking type.
Normal: Normal peaking.
Color: Color peaking.
Selects the peaking frequency from "Normal" (normal
frequency) or "High" (high frequency).
Sets the normal peaking level.
Selects the color of the peaking signal when "Peaking Type"
is set to "Color."
Sets the color peaking level.