Sub Display Setting Items; Camera Screen - Sony PMW-F55 Operating Instructions Manual

Sub Display Setting Items

The item names and its settings are listed below.
Note
When the CBK-55BK (EFP Style Buildup Kit) is attached to the camcorder, some operations and settings are limited.

CAMERA Screen

CAMERA-1
Item name
S&Q FPS
Shutter
Color Temp
52 Sub Display Setting Items
Setting
On: Turns the Slow & Quick motion mode on, and sets the frame rate. (See page 66 for
the selectable item.)
Off: Turns the Slow & Quick motion mode off.
Sets the electronic shutter speed and shutter angle.
Select from following 11 types of items.
Off: Turns the electronic shutter function off.
Value of Step Shutter: Selects from 8 types of presets that are registered as Step Shutter.
(You can change the preset value after selecting.)
Continuous: Selects the available speed/angle. (See page 64 for the selectable item.)
SLS: Selects the slow shutter function. (Set the number of frames to accumulate after
selecting.)
When the CBK-55BK is attached
The SHUTTER switch on the CBK-55BK takes priority.
If the SHUTTER switch is set to OFF, "Value of Step Shutter" and "Continuous" cannot
be selected.
If the SHUTTER switch is set to ON, "Off" cannot be selected.
Sets the color temperature of the white balance.
Preset 3200K/4300K/5500K: Sets the white balance to the preset value of color
temperature 3200K/4300K/5500K.
Memory A/Memory B: Sets the color temperature of the white balance that is stored on
the white memory A or B.
Note
"Memory A"/"Memory B" cannot be selected when "Shooting Mode" (page 91) is set to
"Cine EI."
When the CBK-55BK is attached
The WHITE BAL switch on the CBK-55BK takes priority.
When "Shooting Mode" (page 91) is set to "Custom," "Preset 3200K/4300K/5500K,"
and "Memory A/Memory B" cannot be changed on the sub display.
If the WHITE BAL switch is set to PRST, "Memory A/Memory B" cannot be selected.
If the WHITE BAL switch is set to A or B, only the color temperature of the white
balance that is stored on the white memory on each Memory A/Memory B can be set.
If "Shooting Mode" is set to "Cine EI," the preset value can be selected from Preset
3200K/4300K/5500K for each position of the WHITE BAL switch.